![old model. The large curved dashboard sunshade goes all the](http://Round.zx5618.com/images/1.jpg)
Manufacturing direction of automotive interior and exterior parts: focus on the development of automotive bumper, front module, skylight system, internal and external rearview mirror assembly, dashboard, center console, battery tray, seat, steering wheel, seat belt, roof interior, door interior panel, column exterior panel and other internal and external decoration products. Tracking and promoting the manufacture of sunshade, air outlet, air duct, instrument panel crossbeam, waterproof film, multi-function sensor cover, threshold trim panel, air guide cover, luggage interior trim, NVH parts, energy absorption block, engine cover heat insulation pad and so on.
As summer approaches, the weather is getting hotter and hotter. When the car is parked in the sun and exposed to the hot sun, it only takes more than ten minutes for the temperature in the car to reach 60 or 70 degrees. As a result, many car owners will park their cars in the basement or under the shade of trees, and some will put a sunshade on the front and rear gear of the car, but recently, a car owner wrapped his car into steamed buns because he loved his car. He was criticized, educated and severely punished by the traffic police. The traffic police remind you that there is nothing wrong with loving your car, but you need to be punished for being suspected of traffic violations.
1, study type, leisure sun room: because there will be a long time in the room activities, so heat preservation, leak prevention and ventilation parts will use shading system or warm in winter and cool in summer and so on. At the top of the sunshine room, it is recommended to consider the construction of a mixture of solid roof and glass roof. In this way, the problem of daylighting and heat preservation is solved, and the choice of ventilation and sunshade is considered in the design of doors and windows. However, the cost is higher than the general sunny room, and the construction is difficult, and the requirement of anti-leakage work is higher.
Third, make full use of all kinds of facilities to create favorable conditions for the growth and cold protection of crops, the greenhouse should do a good job of heat preservation and temperature increase in the greenhouse to ensure immortal seedlings, and actively prepare enough film, sunshade net, straw and other covering insulation materials, in case of freezing weather, do a good job of covering and heat preservation, especially solar greenhouse seedlings, and remove the mulch in time after the strong wind and low temperature to reduce disaster losses.
The design of the car also adds more design sense than the old model. The large curved dashboard sunshade goes all the way to the side of the copilot and merges with the features below the center console. The central air outlet is arranged in the change of this profile. In terms of materials for interior decoration, the addition of wood grain and the use of silver panels have also weakened the smell of the second-generation Toyota Innova tool car.
According to the management of medium-and long-term weather forecast, in case of continuous low temperature, the temperature of the mushroom house / shed should be kept above 8 ℃ ~ 10 ℃. The main measures for heat preservation and warming include: thickening the roof cover at night; hanging blankets on doors; closing doors and windows for heat preservation in the morning and evening; opening doors and windows around noon in sunny days; opening only leeward vents for short-term ventilation in rainy and snowy weather; in cold or windy weather, close doors, windows and vents to prevent cold air from attacking. When the weather is fine, open the cover to increase the temperature of the light, when the light is strong, it is best to set up a sunshade net under the greenhouse film and above the bacterial stick to protect the light and heat. If there are heating facilities such as hot air stove, the temperature of the mushroom room / shed can be increased by heating, but attention should be paid to prevent the smoke from being discharged into the shed and cause poisoning. In addition, the ditch cleaning and drainage of the mushroom shed should also be done to reduce the humidity in the greenhouse in the rainy season and improve the mushroom quality.
One-stage LV.1 (body color door handle, wrapped driver and passenger auxiliary handle, front door accent lighting, full-length advanced upgraded floor console, heating steering wheel, dashboard LED ambient light pipe, leather trimmed barrel seat, luxury front door trim panel, bright pedal kit, pickup box lighting, 8-way electric driver and passenger seat, power adjustable pedal, advanced package dashboard bezel, Rain sensitive windshield wiper, rear door accent lighting, rear seat locker, rear window defroster, sunshade with illuminated cosmetic mirror, general garage door opener)
This kind of car decoration mainly includes glove box, mobile phone rack, cup holder, CD sundries bag, sunshade bag, glasses frame, bill rack and so on. These accessories can play a dual role in keeping the car clean and beautiful, and meet the requirements of women to pay attention to the details of life, so they have been selling well in the market.
Now the weather is getting hotter and hotter, many people would rather stay at home and not go out, and for some people who drive to work, it is really a very painful thing. Every time the car door is opened, it is like a sauna. So when car owners park, they will choose to take the sunshade out to block the sun to avoid the excessive temperature in the car, so is the sunshade really useful? Come and have a look with the editor.
Cixian County in the building to meet the design requirements of the premise, the addition of external sunshade, awning and appropriate increase in the length of the southward balcony can play a certain sunshade effect. Heat-reflecting fabric curtains coated with metal film are arranged on the inside of the window, which has a decorative effect on the front, forming a less mobile space layer about 50mm thick between the glass and the curtains. In this way, a good effect of thermal reflection and thermal insulation can be achieved, but the direct lighting is poor and should be made into a movable type. In addition, installing blinds with certain thermal reflection on the inside of the window can also obtain a certain thermal insulation effect.
Air-conditioned buildings rely on refrigerators to move the indoor heat load to the outside in summer. Obviously, if the indoor heat load is reduced, the running time of the refrigerator will be reduced, and the energy consumption of the cooling tower system will be reduced. The indoor heat load comes from two aspects, one is the heat exchange caused by the indoor and outdoor temperature difference, and the other is the heat load caused by indoor lighting and equipment. Therefore, sunshade, airtight, thermal insulation and other methods can be used to reduce indoor heat load and achieve energy saving. 1, reduce indoor heat load (1) sunshade to reduce direct sunlight radiation roof, wall, window and through the window to enter the room, you can use eaves, sunshade panels (awnings), coated glass, etc.; reduce the heat radiation of the external walls and roofs, you can use light-colored exterior wall finishes to set the insulation layer on the outside of the external walls and roofs, or overhead roofs.